Tips to getting Rid of Mould

Mould along with mildew tend to be stressful when they pop up. They look bad and are not good for health. These can spread really fast as well. If you see even a small patch in a room you must remove this immediately. Find out why it is forming so that you can stop this from occurring again.

Information about mould

Mould tends to be a fungus which breaks down any dead material. This forms in homes as they provide the best environment for it to prosper. This includes moisture and warm air. Homes also have the materials that mould can feed on like wood, dust, carpet.

The mould will keep on forming till you clean it and get rid of it. Dead spores are also dangerous to health and therefore you should be careful at the time that you are removing the mould.

The following are some tips to help you handle mould.

Steps to follow:

Extra moisture is a real issue. If this is not present then mould will not grow. Handle the moisture. When you have handled the cause, remove the mould. The below steps can be considered:

  1. You need to keep yourself protected. This can be done by wearing some goggles, rubber gloves as well as a mask which covers the nose plus mouth. Open any windows and keep doors shut to stop spores impacting other places.
  2. Remove any soft furnishings like curtains, toys, cushions, clothes, etc. Clean these carefully.
  3. Find a good mould spray that is safe to use. Follow the instructions on this carefully so that the mould does not spread its spores within the air.
  4. Wipe the area dry using some clean rag. You should vacuum the space so that you can dispose of any residual spores.

Allow light to enter

Mould as well as mildew prefer warm, moist along with dark areas. Therefore, you need to open your curtains in the daytime allowing much natural light as well as fresh air to come in the room and home.

Limit air moisture

When you see that any condensation is gathering on walls, ceiling, etc., dry these at once. You can get moisture traps and put these beneath windows and places that are likely to get damp. Dehumidifiers are helpful when wanting to get rid of moisture within the air.

Good ventilation

Your home must be properly ventilated. This can help halt the damp from forming again. Those who have condensation issues that arise often should handle the home’s humidity carefully.

You need to clean your house properly. Dust often and replace the shower curtains regularly so that you can dispose of any dormant spores and limit the likelihood of the mould appearing again.

If mould is forming in your home you need to find out why this is so. If you know the reason then you can avoid it and so stop the mould from appearing again. If mould is already present, get rid of it immediately.

Share This: